Introduction | I. History of Winchester Guns | II. Models | III. Variations | IV. Outline of Features | V. Condition | VI. Diagrams
Standard Gun
Solid frame or take down in 12 or 16 gauge | |
Full, Modified or open cylinder choke | |
Full round barrel in 30" (12 gauge) or 28" (16 gauge) length | |
Plain modified pistol- grip walnut stock | |
Grooved slide handle | |
Butt Plate metal and flat |
Trap Gun
Marked "TRAP" on the frame bottom | |
Solid frame or take down in 12 or 16 gauge | |
Full, Modified or open cylinder choke | |
Full round barrel in 30" (12 gauge) or 28" (16 gauge) length | |
Checkered and oiled pistol- grip or straight fancy walnut stock | |
Checkered slide handle | |
Butt Plate metal and flat |
Pigeon Gun
Receiver has engraved pigeon on the frame behind the hammer | |
Breech Block is marked "Pigeon" | |
Solid frame or take down in 12 or 16 gauge | |
Full, Modified or open cylinder choke | |
Full round barrel in 28" length for BOTH 12 and16 gauge | |
Checkered and oiled pistol- grip or straight fancy walnut stock | |
Checkered slide handle | |
Butt Plate metal and flat |
Tournament Gun
Top of Receiver Matted to reduced glare | |
Solid frame or take down in 12 gauge ONLY | |
Full, Modified or open cylinder choke | |
Full round barrel in 30" length for 12 gauge ONLY | |
Checkered and oiled pistol- grip or straight select walnut stock | |
Checkered slide handle | |
Butt Plate metal and flat |
Brush Gun
Solid frame in 12 or 16 gauge | |
Cylinder choke | |
Full round barrel in 26" (12 gauge) and 26" (16 gauge) length | |
Magazine tube slightly shorter than 'Standard Gun' | |
Plain modified pistol- grip walnut stock | |
Grooved slide handle | |
Butt Plate metal and flat |
Brush Gun Takedown
Takedown frame in 12 or 16 gauge | |
Cylinder choke | |
Full round barrel in 26" (12 gauge) and 26" (16 gauge) length | |
Magazine tube is same length as an 1897 'Standard Gun' | |
Plain modified pistol- grip walnut stock | |
Grooved slide handle | |
Butt Plate metal and flat |
Riot Gun
Solid frame or take down in 12 gauge ONLY | |
Full round barrel in 20" length | |
Barrel bored to shoot buckshot | |
Plain modified pistol- grip walnut stock | |
Grooved slide handle | |
Butt Plate metal and flat |
Trench Gun
Fitted with barrel hand guard and bayonet | |
Solid frame or take down in 12 gauge ONLY | |
Full round barrel in 20" length | |
Barrel bored to shoot buckshot | |
Plain modified pistol- grip walnut stock | |
Grooved slide handle | |
Butt Plate metal and flat |
Introduction | I. History of Winchester Guns | II. Models | III. Variations | IV. Outline of Features | V. Condition | VI. Diagrams